Garage Door Company in Arlington, TX

Garage Door Service and Repair in Arlington, TX

Good Golly Garage Doors provides complete garage door repair, maintenance, and installation for homeowners throughout Arlington. Our experienced team handles everything from broken springs and opener problems to new door installations, serving all local neighborhoods from Viridian to Dalworthington Gardens. We understand the unique challenges your garage door faces, from the summer heat to seasonal hail, and we have the skills to keep it running smoothly and safely.

Spring Repair and Replacement

The springs are the most important and most dangerous part of your garage door system. They are what do the actual lifting. The garage door opener only guides the door up and down, but the springs provide the muscle. When a spring breaks, your door becomes incredibly heavy and is often impossible to open, even manually. This is the single most common failure on any garage door, especially on the older, heavier doors found in some North Arlington homes.

How Garage Door Springs Work

Most residential garage doors use one of two types of spring systems.

• Torsion Springs: These are large, heavy-duty springs mounted on a metal shaft directly above the door opening. As the door closes, cables unwind from drums at the end of the shaft, causing the springs to wind up and store energy. When you open the door, these springs unwind, and that stored energy does the lifting. They are generally safer, more durable, and provide better balance for the door.
• Extension Springs: These are smaller springs that run along the sides of the upper door tracks, parallel to the ceiling. They work by stretching and contracting, like a rubber band. As the door lowers, the springs stretch, and when the door opens, they contract to help lift the weight. They are more common on older or smaller single-car garage doors.

Signs of a Broken or Failing Spring

A broken spring is usually obvious. You might hear a loud bang from the garage, like a firecracker. Afterwards, you will likely see a visible gap of a few inches in the spring coil. You may also notice that the garage door opener strains to lift the door but cannot get it more than a few inches off the ground, or the door looks crooked as it tries to lift. The emergency release rope will not help if a spring is broken, as the door will be too heavy to lift by hand. If you suspect a spring has failed, do not try to operate the door. It is best to leave it closed and call for professional service.

The Spring Replacement Process

Replacing a garage door spring is not a DIY job. They are under extreme tension and can cause serious injury if handled incorrectly. When our technician arrives, the first step is always safety. We will secure the door to ensure it cannot move. For a torsion spring replacement, we carefully unwind any remaining tension from the spring, remove the old one from the shaft, and install a new, correctly sized spring. For extension springs, we replace them in pairs to ensure the door remains balanced. After installation, we perform a balance test. A properly balanced door should stay in place if you lift it halfway and let go. This balance is critical for the long-term health of your garage door opener, as it prevents the motor from being overworked.

Opener Repair and Installation

Your garage door opener is the motorized device that controls the opening and closing of your door. While the springs do the heavy lifting, the opener provides the convenience and security features you rely on every day. When it stops working, it can be a major disruption. The constant heat in Texas can be hard on the electronic components and the grease that lubricates the drive mechanism, leading to premature wear.

Common Opener Problems We Fix

Many opener issues can be resolved with a simple adjustment or repair. Here are some of the most frequent problems we encounter:

• The door reverses as soon as it hits the floor: This is often an issue with the travel or force settings on the opener. The opener thinks it is hitting an obstruction and reverses as a safety precaution.
• The door will not close, and the opener light blinks: This is almost always a problem with the safety sensors. These two small “eyes” are located at the bottom of the door tracks. If they are misaligned or blocked, they prevent the door from closing. You can check to see if something is in their path or if one of the sensor lights is off or flickering.
• The opener makes noise but the door does not move: This usually points to a stripped gear inside the motor unit or a broken chain or belt. The motor is running, but it is no longer connected to the door.
• The remote or keypad stops working: This can be as simple as a dead battery. If new batteries do not solve the problem, the issue could be with the remote's signal or the opener's internal receiver.

Choosing a New Garage Door Opener

If your opener is old, noisy, or requires frequent repairs, it might be time for a replacement. Modern openers offer significant upgrades in performance, safety, and technology. When choosing a new one, consider the drive type:

• Chain Drive: These are strong, reliable, and cost-effective. They use a metal chain to move the door. They can be noisy, so they are best for detached garages.
• Belt Drive: These use a steel-reinforced rubber belt, making them whisper-quiet. They are an excellent choice for garages with living spaces above or next to them.
• Screw Drive: These use a threaded steel rod to move the door. They have few moving parts and require little maintenance, making them a good choice for extreme climates.

Many new models also come with features like battery backup, which allows you to operate your door during a power outage, and smart home connectivity, which lets you open, close, and monitor your garage door from your smartphone.

Repair vs. Replacement: Making the Right Call

One of the most common questions we get is whether to repair a damaged garage door or replace the entire thing. The answer depends on the type of damage, the age of the door, and your long-term goals. We believe in providing an honest assessment so you can make an informed decision.

When to Repair Your Garage Door

Repair is often the best option for specific, isolated problems. If the majority of your door is in good condition, fixing the one part that failed makes financial sense.

• A single damaged panel: If a car bumps one panel or hail leaves a dent, we can often replace just that single section, provided the model is still in production. This is a common need in Arlington after a big hailstorm.
• Worn-out hardware: Rollers, hinges, and cables wear out over time. Replacing these components is a routine repair that can make an old door run like new again.
• Broken springs or opener issues: As discussed above, these are standard repairs that do not usually require a full door replacement.

When to Consider a New Garage Door

Sometimes, a replacement is the smarter long-term investment. Continuing to repair an old, failing door can become more expensive over time than simply starting fresh.

• Multiple damaged panels: If several sections are bent, dented, or rusted, replacing the whole door is often more cost-effective than ordering multiple replacement panels.
• Age and lack of safety features: Older doors may lack modern safety features. A new door provides peace of mind with better construction and protection.
• Energy efficiency: If your garage is attached to your home, an insulated new door can help regulate the temperature in the garage and reduce your energy bills.
• Improving curb appeal: A new garage door can dramatically update the look of your home. If you live in a neighborhood with an HOA, such as Viridian, it is a good idea to check their guidelines for approved door styles and colors before you make a final decision.

Why Professional Service Matters

Working on garage doors can be complex and dangerous. Beyond the risk of handling high-tension springs, a professional service visit ensures the entire system is inspected for safety and proper operation. An experienced technician can spot developing problems that a homeowner might miss, such as a fraying cable or a roller that is about to fail. This preventative approach saves you from future emergencies and more expensive repairs.

The Importance of Proper Balance and Alignment

A successful repair is about more than just replacing a broken part. It is about ensuring the whole system works together. A properly installed spring must be matched to the exact weight of your door. The tracks must be perfectly aligned to prevent the door from binding. The opener's force settings must be calibrated correctly. Our team takes the time to check and adjust every component as part of our service. This attention to detail is what ensures your door operates smoothly, quietly, and safely for years to come. It also extends the life of your garage door opener, which will not have to strain against an unbalanced or misaligned door.

For Landlords and Tenants

If you are a tenant in a rental home, particularly in areas with high turnover near the entertainment district, you may notice issues with the garage door from deferred maintenance. Structural components like springs and cables are typically the responsibility of the property owner. If you notice a problem, we can help. We are happy to explain the situation clearly so you can pass the information to the property owner or manager who can authorize the work.

Your Next Step

Whether you have a sudden breakdown or you are planning an upgrade, our team is ready to help. If your garage door needs attention, please give our Dallas-based team a call. We will listen to your concerns and help you find the right solution for your Arlington home. You can reach us at (469) 715-1733.