Is Your Garage Door Refusing to Lift or Making Loud Noises?

A broken garage door spring can cause serious disruptions, making it impossible to open or close your door safely. At Good Golly Garage Doors, we specialize in garage door spring repair in Phelan, CA, providing quick and reliable solutions to get your garage door back in operation. Whether you have a torsion or extension spring that’s worn out or broken, our skilled technicians will replace it with precision and care. Don’t risk further damage or potential injury by attempting to fix the spring yourself; let the professionals handle it. Contact us today for expert spring repair and ensure your garage door operates smoothly and safely!

Expert Restoration of Your Garage Door Functionality

When a garage door spring breaks, the entire system fails. The spring acts as the counterbalance to the door’s weight. Without it, the heavy lifting falls entirely on the electric opener or your own physical strength, neither of which is designed to lift a 200 to 400-pound wall of steel dead weight. Continuing to operate the door with a broken spring can strip the gears in your opener, snap the lifting cables, or cause the door to come off its tracks.

We provide a comprehensive response to this mechanical failure. The service focuses on identifying the specific type of spring system your home utilizes, whether it is a standard torsion spring system mounted above the door opening or an extension spring system running along the horizontal tracks. The goal is to safely release any remaining tension, remove the compromised hardware, and install high-cycle replacement springs that match the specific weight and dimensions of your door.

This service includes a full system inspection. When a spring snaps, the shockwave can rattle other components loose. Technicians check the drums, cables, rollers, and hinges to ensure the sudden release of energy didn’t cause secondary damage. You receive a fully balanced door that lifts easily with one hand and allows your automatic opener to function without strain.

The Technical Process of Spring Replacement

Replacing a garage door spring is widely considered the most dangerous aspect of residential garage door maintenance due to the extreme tension stored in the metal coils. Good Golly Garage Doors technicians utilize specialized winding bars and containment procedures to manage this kinetic energy safely. The process is systematic and designed to restore the door’s center of gravity and balance.

• Site Safety and Stabilization: The workspace is secured, and the garage door is clamped or blocked in the closed position to prevent accidental movement. If the door is stuck partially open, it is carefully lowered to the ground to neutralize gravity.
• Tension Release: For torsion systems, a technician inserts hardened steel winding bars into the winding cone of the unbroken spring (if one remains). The remaining tension is slowly unwound in quarter-turns until the cables are slack. For extension springs, the safety cables are detached, and tension is relieved by lowering the door or adjusting the pulley system.
• Hardware Removal: The center bearing plate and the spring anchor bracket are unbolted. The drive shaft (torsion tube) is slid sideways to allow the old springs, drums, and cables to be removed or adjusted. This is often the stage where worn end bearings are identified and swapped out.
• Measurement and Selection: Springs are not “one size fits all.” The new spring must be calibrated based on the height and weight of the door. Technicians measure the wire gauge, inside diameter, and length of the old coils. Using an incorrect spring size will result in a door that is either too heavy to lift or one that shoots up uncontrollably, creating a safety hazard.
• Installation and Winding: The new springs are mounted onto the torsion tube. The cables are re-attached to the drums, ensuring equal tension on both sides to prevent the door from lifting unevenly (racking). The springs are then wound to the specific number of turns required for the door’s height, typically seven to eight full turns for a standard seven-foot door.
• Balancing and Lubrication: Once wound, the door is tested manually. A properly balanced door should stay in place when lifted halfway; it should neither fall to the floor nor drift upward. Adjustments are made to the spring tension to achieve this neutral buoyancy. Finally, the coils are lubricated with a non-silicone-based garage door lubricant to reduce friction and noise during operation.

Critical Decision Guide: When to Replace vs. Repair

Homeowners often ask if a spring can be welded or repaired. The answer is technically no. Once the steel coil has separated, its structural integrity is gone, and it must be replaced. However, the decision often extends to whether you should replace just the broken spring or both springs (in a two-spring system), and whether to upgrade the system entirely.

• The Two-Spring Rule: Most double-car garage doors in Phelan use two torsion springs. These springs are installed at the same time and undergo the same number of life cycles (open/close actions). If one breaks, the metal fatigue in the second spring is likely at 99% capacity. Replacing both simultaneously saves the cost of a second service call when the second spring inevitably snaps weeks or months later.
• Cycle Life Considerations: Standard builder-grade springs are typically rated for 10,000 cycles. For a household that uses the garage as the main front door, this might only last 3 to 5 years. If you plan to stay in the home long-term, upgrading to high-cycle springs (rated for 25,000 to 50,000 cycles) is a mathematically sound investment. These springs use a slightly thicker wire diameter or a larger overall length to distribute stress more effectively.
• Extension to Torsion Conversion: Older homes often utilize extension springs, which stretch and contract along the side tracks. These are generally considered less safe than torsion springs because they can become projectiles if they snap without a safety cable installed. If your system relies on extension springs, a failure is an excellent opportunity to convert to a safer, smoother, and more durable torsion spring system.
• Checking the Opener Gear: If the spring broke while the opener was pulling the door, the plastic gears inside the motor may have been stripped. During the spring repair service, the operator gear and sprocket assembly should be inspected. If the opener hums but the chain or belt doesn’t move, the repair may need to include a gear replacement or a new system.

Why Professional Calibration is Essential

Attempting a DIY repair on garage door springs is ill-advised due to the high risk of severe injury. The potential energy stored in a wound spring is sufficient to break bones or cause deep lacerations. Beyond safety, professional calibration ensures the longevity of your entire garage door system.

A door that is “eyeballed” rather than weighed and calculated may appear to work but could be slightly heavy or slightly hot (too much tension). A heavy door puts strain on the electric opener, leading to premature motor burnout. A door with too much tension can jump off the tracks or damage the top panel when it hits the stop bolt.

Professional service guarantees that the correct spring is matched to the door’s weight delta. This precise balancing act makes the door feel weightless, which is critical during a power outage when you must operate the door manually. Furthermore, professional installation includes a warranty on parts and labor, protecting you against material defects that are invisible to the naked eye. By choosing a dedicated service provider, you ensure that the hardware installed is of professional grade, tempered for durability, and installed to factory specifications.

Restore the Strength and Safety of Your Garage Door System Today

A broken spring brings your entire garage door to a halt, but restoring safe, smooth function is only one expert visit away. With Good Golly Garage Doors, you get precision-calibrated spring replacement, expert diagnostics, and long-lasting hardware designed to withstand Phelan’s demanding high-desert conditions. Our certified technicians ensure your door is fully balanced, safe to operate, and protected from future strain so you can get back to your routine without worry.

When your garage door springs fail, you need a solution that prioritizes safety, speed, and long-term reliability. Don’t let a trapped car disrupt your schedule or a broken door compromise your home’s security. Get your garage door spring repaired today!