Is Your Garage Door Trapped Shut by a Broken Spring?

When you press your wall button and hear the motor hum but the door refuses to lift—or worse, you hear a loud gunshot-like bang from the garage—you are likely dealing with a snapped torsion or extension spring. If you need immediate assistance to get your vehicle out or secure your home, schedule your service now.

In Henderson, where garage doors are frequently the primary entry point for the home, a broken spring brings your daily routine to a complete halt. The spring system is responsible for lifting the heavy weight of the door, and when it fails, the door becomes dead weight that your electric opener cannot and should not attempt to lift. Good Golly Garage Doors understands that this is a safety hazard and a logistical nightmare that requires rapid intervention.

We provide a streamlined solution for homeowners facing this urgent mechanical failure:

• Get same-day repair services to ensure your door operates smoothly with minimal downtime.
• Receive an upfront cost estimate with no hidden fees before any work begins.
• All repairs are carried out by certified professionals who ensure safety and quality.

Fully licensed, insured, and ready to serve 24/7—because garage door issues don’t wait.

Immediate Fixes for Faulty Garage Door Springs

A broken spring is not a minor maintenance issue; it is a catastrophic failure of the counterbalance system. The springs are under immense tension to lift a door that can weigh anywhere from 150 to 400 pounds. When that tension is released suddenly due to a break, the door is no longer supported. Homeowners often mistakenly believe the opener lifts the door, but the opener merely initiates the movement; the springs do the heavy lifting.

Attempting to operate the door with a broken spring can cause extensive damage to the top section of the door or burn out the motor gears in your opener. The immediate fix requires professional detentioning of the system and the installation of new, high-cycle hardware. Our technicians arrive prepared to handle the two main types of spring systems found in local homes:

• Torsion Springs: Mounted horizontally above the door opening. These are the most common in modern homes and use torque to lift the door.
• Extension Springs: Located on either side of the door tracks, stretching and contracting to provide lift. These require safety cables to prevent injury if they snap.

Today’s Service: What to Expect and What It Includes

When you request service for a spring repair, the objective is to restore the door to a safe, balanced state within a single visit. We prioritize efficiency and thoroughness to ensure you are not left with an unsecured home overnight.

Our standard spring repair service includes a comprehensive approach:

• System Inspection: We do not simply swap the broken part. We inspect the center bearing plate, end bearing plates, and the tube shaft to ensure the failure didn’t damage adjacent components.
• Calculated Matching: Springs are not “one size fits all.” We measure the wire gauge, inner diameter, and length of your existing spring to wind a replacement that matches the specific weight of your door perfectly.
• Tensioning and Balancing: A properly installed spring must balance the door so it feels weightless when lifted by hand. If the door falls to the floor or flies up, the tension is wrong. We calibrate this precisely.
• Lubrication and Tune-Up: Once the new springs are on, we lubricate the coils, rollers, and hinges to reduce friction and noise, ensuring the new springs operate smoothly from the first cycle.

Understanding Our Repair Process: Steps for a Quick, Safe Resolution

Replacing a garage door spring is widely considered the most dangerous task in residential garage maintenance due to the stored kinetic energy in the coils. A DIY attempt can result in severe injury or property damage — contact us today. We utilize a controlled, step-by-step process to manage this risk and ensure a perfect installation.

Here is how our technicians manage the replacement:

• Site Safety and Door Securement:

The technician first clamps the door securely to the track to prevent it from falling or shooting up unexpectedly during the repair. This creates a safe working environment.

• Unwinding Remaining Tension:

If you have a two-spring system and only one has broken, the surviving spring still holds massive tension. The technician uses winding bars to slowly and safely unwind the tension from the unbroken spring before removing any hardware.

• Hardware Disassembly:

For torsion systems, the cables are disconnected from the bottom brackets, and the springs are slid off the center shaft. This often requires loosening the drums and bearing plates.

• Installation of New Coils:

The new springs are slid onto the torsion tube. We ensure the stationary cones are bolted to the center bracket and the winding cones are positioned correctly for tensioning.

• Winding and Calibration:

This is the critical step. The technician uses steel winding bars to apply the exact amount of turns required for the door’s height and weight. This is strictly calculated based on engineering standards.

• Testing the Balance:

The technician disengages the electric opener and lifts the door manually. The door should sit halfway open without drifting up or down. If it drifts, the tension is micro-adjusted until the balance is neutral.

Deciding Between Repair and Replacement: Costs and Considerations

Homeowners often ask if they can repair a spring rather than replace it. The short answer is no. A spring that has snapped has reached the end of its “cycle life” due to metal fatigue. Welding or re-hooking a spring changes its physical properties and makes it dangerous. The decision usually lies between replacing just the broken spring or upgrading the entire spring setup.

We guide you through this decision based on long-term value:

• Replace in Pairs:

Most garage doors have two springs installed at the same time. If one breaks, the other is likely near the end of its life. Replacing both simultaneously saves you the cost of a second service call when the second spring inevitably snaps weeks or months later.

• Standard vs. High-Cycle Springs:

Builders often install standard springs rated for 10,000 cycles (one cycle is opening and closing the door once). For an active household, this might last 5-7 years. We offer high-cycle springs rated for 25,000 to 50,000 cycles, which are thicker and more durable, offering a better return on investment for long-term homeowners.

• Converting Extension to Torsion:

If your home has an older extension spring system (the kind that stretches along the sides), we may recommend converting to a torsion system. Torsion systems are safer, smoother, and less likely to whip around the garage if a failure occurs.

Local Insights: Dealing with Henderson’s Climate

Operating a garage door in Southern Nevada presents unique challenges that differ from other regions. The intense heat and dry conditions in Henderson directly impact the lifespan and performance of your garage door springs.

Factors specific to our local environment include:

• Thermal Expansion and Contraction:

Metal expands in heat. In a garage that can easily reach temperatures well above 100°F during the summer, the steel in your springs expands. When temperatures drop at night or in the winter, the metal contracts. This constant fluctuation accelerates metal fatigue, causing springs to snap sooner than they might in a temperate climate.

• High Usage Rates:

In our region, the garage door is frequently the true “front door.” Because of the heat, residents often park inside to protect vehicle interiors and paint. This leads to higher daily cycle counts—often 4 to 6 times a day—wearing down standard springs rapidly.

• Dry Rot and Lubrication Failure:

The arid climate dries out factory grease quickly. Without regular lubrication, the coils bind against each other, creating friction. This friction creates heat spots on the metal, which become weak points where the spring will eventually fracture. Good Golly Garage Doors utilizes specific lubricants designed to withstand high-heat environments without becoming runny or evaporating.

Why Choose Us: Our Commitment to Excellence in Henderson

When your car is trapped and your schedule is disrupted, you need a service provider that prioritizes speed without sacrificing safety. We have structured our operations to address the specific needs of Henderson residents, focusing on reliability and technical precision.

• Fully Stocked Trucks:

Our vehicles act as mobile warehouses. We carry a wide array of spring sizes, wire gauges, and lengths. This allows us to finish the job in one visit rather than ordering parts and making you wait.

• Precision Tools:

We do not guess when it comes to tension. Improperly balanced doors put stress on the opener, leading to expensive motor repairs later. We use professional winding equipment and diagnostic tools to ensure the door is perfectly balanced to within a pound of resistance.

• Warranty Protection:

We stand behind the quality of our steel. Our high-cycle springs come with extensive warranties that cover both parts and labor, giving you peace of mind that your door will lift reliably for years to come.

• Safety-First Protocols:

Spring replacement involves high torque and potential hazards. Our technicians undergo rigorous safety training to protect your property and your family during the repair process. We leave the job site clean and the door fully secured.

A broken spring can happen at the most inconvenient times, but the solution is just a phone call away. Do not risk injury by attempting a DIY repair on high-tension hardware. Let the experts restore your home’s functionality and security today.

Restore Safety and Smooth Operation With Professional Spring Repair

A snapped spring instantly compromises safety, access, and security. With Good Golly Garage Doors, you receive expert diagnostics, precision-matched high-cycle springs, climate-suited lubrication, and safety-driven installation that bring your door back to optimal performance. Whether your door is your home’s primary entrance or your vehicle’s daily gateway, our technicians ensure reliable operation you can count on.

If your garage door is stuck shut or you suspect a failing spring, contact Good Golly Garage Doors through Contact Good Golly Garage to schedule fast, same-day spring repair and restore secure, smooth operation today.

Contact us now to schedule your same-day garage door spring repair.