A Snapped Cable Can Trap Your Vehicle and Compromise Home Security

Garage door cables play a critical role in keeping your garage door balanced, stable, and safe to operate. When a cable becomes frayed, rusted, or breaks, the door can no longer lift or lower evenly. This can leave your vehicle inaccessible and place additional strain on other components of the garage door system. In Madison, AL, where humidity and seasonal weather changes affect metal hardware, cable issues are a common and serious concern.

When a cable fails, the weight of the door shifts unevenly. This imbalance can damage tracks, rollers, drums, and the opener if the door continues to be used. At Good Golly Garage Doors, our team focuses on identifying the cause of the failure and restoring proper balance so the entire system operates safely again. We provide professional cable repair services that emphasize correct diagnosis, proper replacement, and long-term system reliability rather than temporary fixes. Call us today to get started with garage door cable repair in Madison, AL.

Expert Service for Critical Garage Door Failures

When you call for service, the priority is securing the heavy door and relieving the tension that makes a broken system dangerous.Good Golly Garage Doors sends technicians equipped with the full range of cable sizes and winding bars necessary to handle standard lift, high lift, and vertical lift assemblies found in residential properties.

The initial assessment involves more than just looking at the broken wire. The entire counterbalance system must be inspected. If one cable has snapped, the other is likely under extreme stress or near the end of its fatigue cycle. The service includes a full inspection of the drums, the bottom brackets, the torsion tube, and the springs.

Upon arrival, the technician secures the door in the down position to prevent it from crashing or springing up unexpectedly. The goal is to stabilize the environment before any removal takes place. You receive a clear explanation of what caused the break, whether it was rust, fraying due to rubbing against the track, or simple metal fatigue, and a plan to replace the components with high-cycle aircraft-grade steel cables.

The Process of Safely Replacing High-Tension Cables

Replacing a garage door cable is not a simple swap; it is a recalibration of the entire door system. The cables work in unison with the springs to lift hundreds of pounds. When that equilibrium is lost, the repair process must be methodical to ensure the door opens evenly and closes tightly without gaps.

Securing the Door and Releasing Tension

The process begins by physically locking the door to prevent movement. Since the cables are attached to the bottom brackets, which are under the tension of the springs, the technician must first unwind the springs. This releases the stored energy in the system, making it safe to manipulate the cables at the drum and the bottom bracket.

Removal of Damaged Hardware

Once the tension is zeroed out, the frayed or snapped cable is removed from the drum at the top and the fixture at the bottom. The technician checks the drums for cracks or chips. Plastic drums often wear out over time, and metal drums can develop grooves that fray new cables. If the drums are compromised, they are replaced alongside the cables to prevent recurrence of the issue.

Installation of High-Cycle Cables

New cables are routed from the bottom bracket up to the torsion tube drums. The path must be clear of obstructions. The technician ensures the cable sits perfectly in the drum grooves. If the cable is not seated correctly, it will jump the drum during the first cycle, causing the door to jam.

Resetting Tension and Balancing

With new cables in place, the springs are re-wound to the specific manufacturer’s specifications based on the door’s weight and height. This is the most critical step. If the tension is too high, the door will not stay closed; if it is too low, the opener will struggle to lift the door. The technician makes micro-adjustments to ensure the door is perfectly balanced, meaning you should be able to lift it manually with one hand halfway up, and it should stay there.

Final Safety Inspection and Lubrication

The repair concludes with a full cycle test. The door is operated automatically and manually. All moving parts, including hinges, rollers, and the new cables, are lubricated to reduce friction and noise. The safety sensors are realigned to ensure the door reverses if an object is in its path.

Deciding Between Cable Repair and Full System Overhaul

Homeowners often ask if a cable can be spliced or repaired. The answer is always no. Garage door cables are under immense tension and support heavy loads; a spliced cable creates a weak point that will fail, likely causing property damage or injury. The decision usually comes down to replacing just the cables or updating the mating components as well.

When to Replace Only the Cables

If your garage door system is relatively new (under 5-7 years old) and the break was caused by an external factor, such as a car bumping the door or an object caught in the track, replacing just the cables is standard. This assumes the springs are still strong and the drums are in good condition.

When to Replace Cables and Springs

Cables and springs act as partners in the lifting system. They share the same cycle life rating. If your cables have snapped due to age and wear (fatigue), your springs are likely near the end of their life as well. Replacing them together saves money on a second service call in the near future and ensures the door is perfectly balanced with fresh hardware.

When to Address Rollers and Drums

If the cable snapped because it was rubbing against a track or getting pinched, simply replacing the cable treats the symptom, not the disease. In this case, the technician may recommend replacing worn rollers that are causing the door to wobble, or replacing the drums if they are causing the cable to spool unevenly.

Technical Expertise and Safety Standards

Replacing garage door cables without proper training is one of the most hazardous tasks a homeowner can attempt. The bottom bracket, where the cable attaches, is under extreme spring tension. Removing or loosening this component while the system is loaded can result in severe injury. This is why cable replacement should always be handled by trained professionals.

Proper repair starts with using the correct cable size and construction. A cable that is undersized for the weight of the door will wear prematurely and fail again. An oversized cable may not seat correctly in the drum grooves, which can cause the door to bind or lift unevenly. We install cables that match the door’s specifications and meet manufacturer requirements for strength and durability.

Spring adjustments are essential for the proper functioning of your garage door. Each door requires the correct amount of torque based on its weight, height, and lift configuration. Incorrect tension can result in the door slamming, drifting, or placing excessive strain on the opener. Our technicians are highly trained in servicing standard, high-lift, and vertical-lift systems, ensuring that the appropriate techniques are applied to restore balance. Every cable repair includes a comprehensive safety inspection of the entire system, verifying that the opener’s reverse mechanism and photo eye sensors are operating correctly. When you enroll in our Good Golly Gold Plan, you will receive exclusive discounts on all services, including spring adjustments and repairs.

Restore Your Garage Door’s Strength and Security Today

A failed garage door cable affects more than convenience. It compromises the balance, safety, and reliability of the entire door system. Addressing the issue correctly helps prevent further damage to tracks, rollers, drums, and the opener.

At Good Golly Garage Doors, we focus on professional repairs that restore proper operation and long-term stability. Our work emphasizes correct installation, careful adjustment, and clear communication so you understand the condition of your system and the steps taken to repair it. If you are experiencing signs of cable wear or failure, scheduling service promptly helps protect your garage door and reduce the risk of additional damage. Contact Good Golly Garage Doors to arrange professional garage door cable repair in Madison, AL, and restore smooth, dependable operation to your home.